LaCie 2big Quadra
•
Design by neiL PouLton
setup
user Manual
page 22
3.4.2. Formatting for Windows Users
The process of formatting a drive on a computer running Win-
dows 2000, Windows XP or Windows Vista consists of two steps:
(1) installing a signature on the drive, and (2) formatting the
drive. These steps will erase anything that is on the disk.
CAUTION:
Following these steps will erase everything from
the 2big. If you have information that you want to protect or
continue to use, back up this information onto another medium
before performing these steps.
TeChNICAl NOTe:
Windows XP 32-bit and Windows 2000:
These operating
systems will not recognize volumes greater than 2TB in size.
Windows XP x64 and Windows Vista Enterprise/Ultimate
(32- and 64-bit versions):
These operating systems will rec-
ognize volumes greater than 2TB in size, but the disks must be
converted to the GPT file system before partitions greater than
2TB can be created.
Connect the drive to the computer via the interface port.
1.
Right-click
2.
My Computer
and select
Manage
.
From the “Computer Management” window, select
3.
Disk
Management
(located below the
Storage
group). See Fig.
3.4.2-A (screens may differ slightly depending on the sys-
tem).
TeChNICAl NOTe:
If the 2big Quadra is in Mixed mode,
there will be two partitions on the disk.
If the “Initialize and Convert Disk Wizard” window appears,
4.
click
Cancel
.
Windows will list the Hard Disks that are installed on the
5.
system. Locate the drive that is represented by the
icon.
Right-click the icon and select
Initialize
.
TeChNICAl NOTe:
If the 2big is in Mixed mode, format
each partition separately.
Windows XP x64 and Windows Vista Enterprise/Ultimate us-
6.
ers only:
Right-click the disk and click
Convert to GPT
.
In the box to the right that says
7.
Unallocated
, right-click and
select
New Partition…
Figure 3.4.2-A
