LaCie 12big Rack Network
Module Removal & Replacement
User Manual
page 40
5.3.3.2. Installing a Drive Carrier
IMPORTANT INFO:
A Drive Carrier module cannot be installed
if its anti-tamper lock is activated outside the enclosure. Please refer
to section
5.3.3.1. Removing a Drive Carrier
for the de-activation
procedure.
Parts Check List
✦
Drive Carrier module
1. Release the drive carrier handle, by depressing the latch in the
handle (see
Fig. 30
).
2. Insert the drive carrier into the enclosure (
Fig. 31
).
IMPORTANT INFO:
Ensure that the carrier is orientated so that
the drive is uppermost and the handle opens from the left, as shown
in
Fig. 32
.
3. Slide the drive carrier, gently, all the way into the enclosure.
4. Cam the drive carrier home - the camming foot on the base
of the carrier will engage into a slot in the enclosure. Continue
to push firmly until the handle fully engages. A click should be
heard as the latch engages and holds the handle closed.
continued on the next page >>
Fig. 30 - Installing a Drive Carrier Module (1)
Fig. 31 - Installing a Drive Carrier Module (2)
Fig. 32 - Engaging a Drive Carrier Module in an
Enclosure)