LaCie Dupli Disc DVD125 USB 2.0
User Manual
page
Setting Up Your LaCie Dupli Disc DVD125
3. Setting Up Your LaCie Dupli Disc DVD125
3.1. Powering On Your LaCie Dupli Disc DVD125
Setting up your LaCie Dupli Disc DVD125 is a
snap – just follow these basic steps:
Set-up your LaCie Dupli Disc DVD125 on a flat
surface, and make sure there’s enough room at the
back for ventilation.
Check the voltage setting at the back panel of your
duplicator.
Connect the provided AC cable to the back of the
LaCie Dupli Disc DVD125 and the other end to a
properly grounded outlet.
Turn on the LaCie Dupli Disc DVD125 using the
On/Off switch located on the front of the device.
1.
2.
3.
4.
DVD Duplicator
2033s ver: 1.61s
OS booting ...
Once the LaCie Dupli Disc DVD125 is turned on,
the following messages will appear:
CAUTION:
Before connecting your LaCie Du-
plicator to the main power source and switching it
on, please check the voltage setting located at the
back panel of this device next to the power socket.
You should use a screwdriver to change the voltage
setting if it differs from that of your main power
source. Default voltage is 230 V.
Then LaCie Dupli Disc DVD125 will display:
1. Copy
The
COPY
function is the main function. Your La-
Cie Dupli Disc DVD125 features 11 other functions.
Press the
Up
or
Down Arrow
buttons to see and ac-
cess the other functions.
DDR Memory .. 64MB
Found 6 Devices
