3. Setting Up Your LaCie photon20visionII Monitor
page 12
LaCie photon20visionII
User’s Manual
5) Connect the signal cable to the back of the monitor.
Once the signal cable is attached, tighten the
thumbscrews to secure the connection.
6) Attach the female end of the supplied power cable
into the AC power connector on the back of the
monitor, and the male end into a properly-grounded,
three-prong AC outlet.
7) After connecting the power supply and signal
cables, re-attach the stand cover by placing the slots
on the bottom back into the holes on the stand. Once
securely connected, you should hear a “click” sound
when it latches.
PUSH
PUSH