13
Returning the trolley to hole 1 of the rack pole, reassemble the tilting arm [9]
inside the handling trolley, inserting the steel pin and the appropriate nuts and
bolts previously removed in point 1. Tighten the screws well.
NOTE:
To facilitate the centering action of the tilting arm with the hole in the
carriage, it is possible to use the angular locking pin [3] by inserting it in
the -60° hole
x2 x2 x2
M10x25
Ø10.5*Ø30
S. w
asher Ø10
n 6
x2 x1
3
9
NOTE:
Before inserting the steel pin, it is advisable to lubricate the bushings of
the swinging arm and the pin itself to remove any possible trace of dirt and
favor smoother arm operation.
