A. Connect RPM sensor wire as below.
B. The default value of resistance is 6 before connecting
the tension steel wire, please shift the gear to level 1
after connection.(As below)
C. Put all connections in proper position.
ASSEMBLY INSTRUCTIONS
Step 1. Leveling the treadmill.
To adjust the Universal adjustable pad in the bottom of main frame until pads firmly flat on the ground
or floor.
WARNING: It’s extremely important that pads are correctly adjust to proper postions. An
unbalanced unit may cause running belt misalignment or other issues.
WARNING: Please pay attention to the wires in case of the broken damage by assembling
the upright post on the main frame.
Step 2. Connect RPM sensor wire and tension steel wire, then assemble the right upright
post on the main frame.
Universal adjustable pad x 4 pcs