Lacerta FMC, Руководство пользователя

Страница: 4 / 17

Stepper motor: 200 step/revolution, 2 phase bipolar,
800mA / coil max. current.
Motor connection: RJ45-8p8c, pinout:
1 = Temperature signal
2 = Motor coil A-Plus
3 = Exposure signal
4 = Motor coil A-Minus
5 = +5V
6 = Motor coil B-Plus
7 = GND
8 = Motor coil B-Minus
Only use with 1:1 UTP cable.
NEVER
use reverse UTP (cross-link) cable!
PC connection: USB-B mini
Temperature Probe 180cm long with hole to be screwed
somewhere, 3,5mm stereo jack
version 1.1.08:
- first version
Installation
For comprehensive use of device, it’s necessary to install the USB driver and PC
applications first. You can see below the installation steps on a Windows 7/64 bit
system
Installing the FTDI USB driver:
Connect LACERTA FMC to PC and your power supply using accessory cables.
Turn on the device. The Operating System recognizes the device and it’s looking for
a suitable driver. If it does not find the driver automatically, the screenshots below
help you to successful install the driver after opening the Device Manager. The FTDI
USB driver is found either in the firmware zip file at the USB_driver folder, or you can
download the newest version from the FTDI website:
http://www.ftdichip.com/Drivers/D2XX.htm
(a setup executable is provided in the column at right, and you find more installation
advices there, if needed)
LACERTA FMC 4 2022