LACAVA
Installation Instructions/Instrucciones de Instalación
Max 1 3/4”
45
1. Install spout body into mounting hole and install
washer and lock nut from underneath the mounting
surface (avoid damaging mounting surface by over-
tightening).
5
2. Mount the hand dryer operating box within 21” of the spout
location, and connect it to the spout with flexible hose.
For best performance, keep the connecting hose straight if
possible, free of unnecessary turns and twists.
For ADA compliant installation, refer to ADA requirements.
a. Mark the location of mouting screws, and install
the mounting bracket, using the provided or suitable
hardware.
b. Hook the back of the hand dryer box onto the mounting
bracket and secure the bottom of the hand dryer box
to the wall.
c. Feed the sensor cable through the flexible hose, making
sure the cable is not kinked, screw the hose onto the tail
of the spout.
d. Connect the sensor cable to the hand dryer box
via a metal 3-pin aviation plug and hand-tighten the base.
e. Make sure to place the sensor cable in the slot on the
hose coupling sleeve, and tighten the hose clamp.
Do not pinch the senser cable.
3. Plug power cord to wall socket.
1.
2b.
2a.
2d.
!
2e.
3.
2c.
