INSTALLER’S MANUAL
VOUGEOT - VOLNAY
BACK SPACER VENT FITTING :
It is
MANDATORY
to mount the back spacer vent
R
supplied with the appliance (or equivalent) to the wall, this
allows for ventilation and reduces the risk of heat damage.
Screw the 2 brackets
S
to the wall according to figures 33, 34 and 35 (screws not supplied), then fit the back spacer
vent onto these brackets by using the washers and nuts supplied with the range.
STABILITY DEVICE INSTALLATION INSTRUCTIONS :
Screw the anti-tip bracket
T
to the wall according to figures 34 and 35 (screws not supplied).
Remove the right-hand drawer; push the range against the wall until the anti-tip bracket screw goes through the back of
the range. Through the drawer gap, screw the nut and its washer on the anti-tip bracket screw.
1
1
2
2
3
4
5
L1
N
120/240 V ; 3-Pole ; 4-wire
L2
Fig. 32
Fig. 31
Q
Fig. 30
P
Fig. 29
P
Fig. 28
O
