Lacanche CLUNY, Руководство пользователя

Страница: 18 / 42

INSTALLER’S MANUAL
CLUNY
Page 18 of 42– US –
BACK SPACER VENT FITTING:
It is mandatory to mount the back spacer vent R to the wall supplied with the appliance.
Screw the 2 brackets S to the wall according to figures 29, 30 and 31 (screws not supplied), then fit the back spacer
vent onto these brackets by using the washers and nuts supplied with the range.
STABILITY DEVICE INSTALLATION INSTRUCTIONS:
Screw the anti-tip bracket T to the wall according to figures 30, 31 and 32 (screws not supplied).
Remove the left-hand drawer, push the range against the wall until the anti-tip bracket screw goes through the back
of the range. Through the drawer gap, screw the nut and its washer on the anti-tip bracket screw.
Fig. 28
Figure 30
S
R