Lacanche BEAUNE, Руководство пользователя

Страница: 9 / 42

INSTALLER’S MANUAL
CABINET PREPARATION
BEAUNE/ BUSSY :
A B C D E F G H I J K L M N
O
mm 914 330 457 930 150 230 175 395 20 60 765 865 910 51 660
’’ 36 13 18 36 5
15
/
16
9
1
/
16
6
7
/
8
15
9
/
16
13
/
16
2
3
/
8
30
1
/
8
34
1
/
16
35
2
/ 2 26
B
A
D
K
G
I
C
J
E
F
H
L
M
N
N
Gas
connection on range
Electrical
connecti
O
Ø
The range is a free standing unit. If the unit is to be placed next to cabinets, the clearances
shown in Figure
1
are required.
Ø
The range cooktop surface must be no lower than the adjacent base countertop surface.
Ø
Min clearances to combustibles :
Ø
0’’ (0 mm) from rear (with spacer installed).
Ø
0’’ (0 mm) from sides
below
countertop surface height.
Ø
2’’ (51 mm) from sides
above
countertop surface height.
Ø
Cabinets 13’’ (330 mm) deep may be installed above the range at least 30’’ above the plane
of the cooking surface.
Use range only with factory supplied legs.
1
IMPORTANT
► Recommended to be installed under an exhaust hood.
►
Do not install this unit near combustible walls, partitions, pieces of furniture or
decorative material unless these are covered with adequate thermal insulation of the
noncombustible type.
Make sure the resulting installation meets fire regulations.
THE APPLIANCE MUST BE INSTALLED IN ACCORDANCE WITH THE LOCAL CODES
OR National Fuel Gas Code, ANSI Z223.1 or latest edition .
Manual shut-off valve should be installed in an accessible location in the gas piping
external to the appliance for the purpose of turning on or shutting off gas to the
appliance.
Notice provisoire Beaune - Bussy UL - FT164h - Date : 16/10/12 9/42
5
8
/
on on range
►
►
In the state of Massachusetts, the appliance must be installed by a licensed
plumber or gas fitter.
Place electrical and gas
stub-outs in this area