Labrie OPTIMIZER 2007, Руководство оператора

Страница: 29 / 36

Part #: 90320 23
Figure 24. Safe driving position
12. Before going to the landfill or driving on a long distance, close the hopper roof gate
and turn off the hydraulic system. See “Hopper Roof Gate Switch” on page 13 and
”Pump Switch” on page 9.
Packing Refuse in the Body
When some containers have already been unloaded in the hopper, the packer of the
Optimizer
TM
will help you clear the hooper area by packing the refuse in the body.
Note: Labrie Environmental Group recommends to perform this task while you
move from one collection point to another.
To pack refuse in the body:
1. Turn on the hydraulic system. See “Pump Switch” on page 9.
Note: If the side door (or hopper door) is open, the hydraulic pump won’t work. The
side door MUST be closed in order to start the hydraulic pump.
2. Open the Hopper Roof.
3. Press the green button to start the packer cycle. See “Green Button” on page 12.
Unloading the Optimizer
TM
Once the body of the Optimizer
TM
is full, it is time to unload it at the corresponding landfill.
To unload the Optimizer
TM
:
1. Drive it to the landfill.
2. Once you have chosen the area where to dump the refuse, park the vehicle on
safe, level ground.
3. Get off the cab and check for overhead clearance or any kind of obstruction.
4. Remove the tailgate safety pins.
ARMS AND FORKS IN
SAFE DRIVING POSITION