Labrie OPTIMIZER 2007, Руководство оператора

Страница: 12 / 36

6
Part #: 90320
• To keep the vehicle maintained and properly adjusted to meet the manufacturer’s
standards and recommendations. For help or more information, contact the
manufacturer or any authorized representative.
• To keep record of any breakdowns or malfunctions of the vehicle as well as any
inspection and maintenance.
• To ensure the repair of any failures or malfunctions that may affect the safe use of the
vehicle, always before it is used again.
• To meet the appropriate lighting requirements for night shift work (if permitted).
• To regularly accompany the operator of the vehicle and take measures to ensure the
smooth and safe operation of the vehicle.
• To make sure that the backup alarm works properly while the vehicle is in reverse.
• To take the necessary measures that follow a damage or malfunction report from any
employee.
• To establish and ensure the application of a “Lockout/Tagout Procedure” at the time of
any inspection, repair or maintenance to the vehicle, whether it takes place on the
road or in the garage.
Responsibilities of the Employee
It is the responsibility of the employee:
• To enforce all safety measures to meet the requirements established by the employer.
• To operate the Optimizer TM only after having received instructions and training.
• To immediately report to the employer or supervisor about any damage or malfunction
of the vehicle.
To make sure that there is nobody near the vehicle before activating any of the controls
and be prepared to stop everything upon the existence of possible danger.
L
OCKOUT
/T
AGOUT
The Lockout/Tagout procedure must be applied to render the vehicle out of service and
thus ensure its safety and that of those who will be around it.
To lock out and tag out the Optimizer
TM
:
1. Apply the parking brake.
2. Turn off the hydraulic system and the engine.