7
FITTING JET NOZZLE.
The jet nozzle assembly fits into the top of the unit and is fastened in by a threaded ring.
Align the liquid inlet and compressed air inlet as required.
Fit the white nylon tube into the push-fitting mid way down the jet assembly and the blue nylon tube
into the push in fitting at the top of the assembly .
The silicone tube for the liquid sample is fitted to the grooved inlet. The remaining tube is fitted
through the pump and the open end placed into the sample.
EXHAUST TUBING
Fit the 50 mm diameter flexible exhaust tube supplied over the exhaust outlet (P) and direct to
atmosphere or existing extraction system.
THE SD-06AG IS NOW READY FOR USE. SWITCH ON THE POWER AND PROCEED.
