LABORIE Urocap III, Руководство пользователя

Страница: 35 / 73

LABORIE Urocap III Owner’s Manual UC3-UM01 30
NOTE 1: There are seven buttons on each row; the last two buttons of the first and second rows are reserved for system
use. You can program the rest of the buttons.
NOTE 2: Some of the commands listed are not applicable to the Urocap III. See the Control Panel Commands section on
page 34 for a listing of available commands.
Name of the function
button:
i. Double-click the Label text box of the button. (The entered text will
be displayed on the Control Panel button in the UDS Client screen.
ii. Enter the name of the function button using the keyboard.
iii. Repeat steps 1 and 2 until all the function buttons are labeled.
Definition of the name
on the function button:
i. Click in the appropriate text box under the Definition column.
ii. Enter the new definition using the keyboard.
IMPORTANT!
The meaning of the definition depends on the type of
Control Panel button. Please refer to the
Control Panel Commands
section
on page 34
for more details.
iii. Repeat steps 1 and 2 until the definitions for all items on the Control
Panel are complete.
Type of function button: i. Click on the down arrow of the appropriate combo box to the right
of each button’s function.
ii. Select the appropriate function command type.
iii. Repeat steps 1 and 2 until the type of all function buttons in the row
are set.
3. Click the down arrow of the Current Row to move to the second row of function buttons.
4. Click OK when all desired buttons are completely configured.
To change the… Then…