LABORIE Solar Blue, Руководство по обслуживанию и установке

Страница: 27 / 198

26 © 2008
– 2020 by MMS B.V.
Chapter 2
2.7 Safety Module
When the complete Solar Blue measurement system is built onto the pole,
including the laptop and printer, a safety module may be required. This may
also be the case for other set-ups. The module is available for 115V/60Hz and
230V/50Hz @ 300VA.
WARNING If a safe system setup in accordance to the IEC-60601
cannot be guaranteed, a Safety module is required.
Please contact your LABORIE representative.
Figure 2.5 Safety module
On the safety module, you will find:
- 1 AC input: C14 socket
- 4 AC outlets: 4 x C13 sockets
- 2 fuses
- On/Off switch
- Safety earth point: 1 x M6 thread stud
For more information please see § 9.3 or consult the accompanying
documents of the safety module.
LABORIE provides an adapter cable for the European CEE 7/4. To
accommodate local mains plugs the CEE 7 socket may be exchanged by a
different type with a protected earth conductor (class I), purchased by an
official LABORIE representative.