PixelPro
3.2
Instruction
Manual
R
32
Brightness:
The brightness of the image. Default value is 0. Adjustment ranges from – 255
to 255.
Gamma:
Adjusts the brightness of the image displayed on the monitor. Default value is
1.00. Adjustment ranges from 0.01 to 2.00.
Contrast:
The ratio between the darkest and brightest areas of the image. Default value
is 0. Adjustment ranges from –80 to 80.
Saturation:
The purity of the color. Set higher values for more intense colors. Default
value is 0. Adjustment ranges from –180 to 180180.
Sharpen:
Simulates adjusting focal length on blurred edges of the image, leading to a
more vivid color in the specified area of the image. Default value is 0. Adjustment ranges
from 0 to 3.
To finalize the parameter adjustments for the image, click
[Apply as a New Image]
. The
set parameters will be applied to the original image and saved as a new image.
Default:
Click the
[Default]
button to restore all parameters to factory defaults.
4.2
Image Dye
Monochrome images must be colorized first. The user can select colors from the color
editor and corresponding fluorescent dyes. After color selection, click
[Apply as a New
Image]
colors to the picture, to obtain a realistic color picture closely corresponding to
that observed under a microscope. Click
[Cancel]
to cancel dyeing.
