Labomed Luxeo 2S, Руководство пользователя

Страница: 15 / 20

12
Luxeo
4140000-795
Luxeo
Issue 1.3
Printed on Jan.,2020
INITIAL SETUP
9
INSTALL EYEPIECES
1
POWER ON THE MICROSCOPE
2
Fig. 4
Fig. 5
Fig. 3
Fig. 2
Recover the eyepieces from packing and install them in the
eyepiece ocular one by one. The ocular tubes are equipped with
locking system which prevents the eyepieces from falling, rotat-
ing freely or easily pulled out.
When Wearing Eyeglasses
Use with the eye guards in the normal, folded-down position.
This will prevent the eyeglasses from being scratched.
When Not Wearing Eyeglasses
Extend the folded eye guards outwards (direction of the arrow) to
prevent ambient light entering into your line of vision.
Plug in the power cord and insert the power adapter to the AC
socket.
Gently press the power on switch (A). the green LED (B) will
indicate the power on indication.
The illumination can be switched in individually for incident and
transmitted illumination from the switched provided on the base,
left side of the column.
Gently press this button to power up the transmitted illumination.
Gently press this button to power up the incident illumination.
The incident illumination is controlled by this switch to glow all
the ten LED’s, five front LED’s or five rear LED’s. Press the button
in the following sequence to illuminate the LED’s.
Press once to illuminate all the LED’s in the ring.
Press twice to illuminate the front five LED’s.
Press thrice to illuminate rear five LED’s.