Labom PASCAL CS Series, Руководство по эксплуатации

Страница: 11 / 20

BA_060 Rev 1B6 Pressure transmitter PASCAL CS Page 11/20
6.2 Main Menue
The main menue contains the following functions:
Display Designation Description
Basic functions Setting the unit, setting the zero point, min./max.
pointer
Display functions All settings relating to the display
Switch point settings Configuration of the switching outputs (optional)
System data Displaying system data (versions, serial number);
reset to factory settings
Return Return to display mode
Table 3: The items in the main menue
6.3 Basic Menue (
bASE
)
The basic menue contains the following items:
Display Designation Description
Measuring unit Setting the measuring unit via a parameter list
Set zero point
(Teach lower range) Setting the applied pressure as zero point (0 bar)
Min. pointer (low) Display resp. delete the min. pointer
Max. pointer (high) Display resp. delete the max. pointer
Return Return to the main menue
Table 4: The items in the basic menue
6.3.1 Setting the measuring unit (
unit
)
The device can operate with the units shown in the table 5. The selected unit applies to
data entries (e.g. for set points) and to the displaying of numerical values (e.g. the
min./max. pointer).
Display Unit Display Unit
bar kPa
mbar MPa
PSI mA
% Return
Table 5: Parameter list for the measuring unit