Labnet MultiGene OptiMax Thermal Cycler Скачать руководство пользователя страница 24

22

 

         

|        LABNET MULTIGENE OPTIMAX THERMAL CYCLER

 15.0  Limited  Warranty

Corning Incorporated (Corning) warrants that this product will be free from defects in material and workmanship for a period of 
three (3) years from date of purchase. CORNING DISCLAIMS ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING 
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. Corning’s sole obligation shall be to 
repair or replace, at its option, any product or part thereof that proves defective in material or workmanship within the warranty 
period, provided the purchaser notifies Corning of any such defect. Corning is not liable for any incidental or consequential damages, 
commercial loss or any other damages from the use of this product.

This warranty is valid only if the product is used for its intended purpose and within the guidelines specified in the supplied instruction 
manual. This warranty does not cover damage caused by accident, neglect, misuse, improper service, natural forces or other causes not 
arising from defects in original material or workmanship. This warranty does not cover motor brushes, fuses, light bulbs, batteries or 
damage to paint or finish. Claims for transit damage should be filed with the transportation carrier.

In the event this product fails within the specified period of time because of a defect in material or workmanship, contact Corning 
Customer Service at: USA/Canada 1.800.492.1110, outside the U.S. +1.978.442.2200, visit www.corning.com/lifesciences, or contact 
your local support office.

Corning’s Customer Service team will help arrange local service where available or coordinate a return authorization number and 
shipping instructions. Products received without proper authorization will be returned. All items returned for service should be sent 
postage prepaid in the original packaging or other suitable carton, padded to avoid damage. Corning will not be responsible for 
damage incurred by improper packaging. Corning may elect for onsite service for larger equipment.

Some states do not allow limitation on the length of implied warranties or the exclusion or limitation of incidental or consequential 
damages. This warranty gives you specific legal rights. You may have other rights which vary from state to state.

No individual may accept for, or on behalf of Corning, any other obligation of liability, or extend the period of this warranty.

For your reference, make a note of the serial and model number, date of purchase, and supplier here.

Serial No.  __________________________________________ 

Date Purchased  _______________________________________

Model No.  _________________________________________ Supplier _____________________________________________

 16.0  Equipment  Disposal

According to Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and 
electronic equipment (WEEE), this product is marked with the crossed-out wheeled bin and must not be disposed of with 
domestic waste. 

Consequently, the buyer shall follow the instructions for reuse and recycling of waste electronic and electrical equipment 
(WEEE) provided with the products and available at 

www.corning.com/weee

.

 

Содержание MultiGene OptiMax Thermal Cycler




























Отзывы: