8
| LABNET MULTIGENE OPTIMAX THERMAL CYCLER
7.1 Viewing a User Folder
All Protocols are stored inside the User folders. Use the directional arrow keys to select a User folder. Press F1:OPEN to view the names
of all Protocols inside the selected folder. To view the contents of the User, you will need to enter the 4-digit Personal Identification
Number (PIN) as shown in the screen below. After the PIN is entered, press F1:ACCEPT or the ENTER key to confirm the PIN. To run a
Protocol, see Section 8.1.
USER FOLDERS>Mike
8/21/2022
11:00
Please enter PIN:
Enter PIN and press ACCEPT, Press ACCEPT if
not PIN protected.
ACCEPT
EXIT
F 1
F 2
F 3
F 4
F 5
7.2 Creating a New User Folder
Under User Folder screen, press F2:NEW to create a new User folder. After entering the new User name, press F1:ACCEPT to accept the
new User folder name. The MultiGene thermal cycler will prompt you to enter a 4 digit PIN. Press F1:ACCEPT to save the new folder
name and PIN.
User folder name:
12 characters max.
User folder no.:
50
7.3 Editing a User Folder
Under the User Folder screen, use the directional arrow keys to select a User folder. Press F3:EDIT to edit the User name. A PIN is
required to edit the User folder name. After editing the User folder name, press F1:ACCEPT to save the edited User name.
7.4 Deleting a User Folder
Use the directional arrow keys to select a User folder. Press F4:DELETE to delete the selected User folder. You are required to enter the
PIN, and press F1:ACCEPT or ENTER. The screen will prompt “Do you want to delete”. Press F1:ACCEPT to confirm the deletion. Press
F5:EXIT to abort the deletion.
NOTE:
User folders which contain any protocols can’t be deleted except by the administrator.