6
| LABNET MICROTUBE SHAKING INCUBATOR
7.3 Pulse vibration
Press
Short/Prog
to start instant vibration or short-term vibration. Press the button to start it, and release the button to stop it.
The running speed of pulse vibration is the highest vibration speed.
7.4 Correct temperature discrepancy
The temperature of the instrument has been calibrated before shipment. However, due to various conditions, there might be
discrepancies between the actual temperature and the displayed temperature. In this case, you may use the calibration button to
correct the discrepancy.
To ensure the accuracy of the temperature, wait for at least 30 minutes after the instrument is set at a constant
temperature, and then perform the calibration.
Use certified standard class two mercury thermometers to calibrate this instrument.
Calibration point: Center hole of the module. Fill the hole with paraffin oil and immerge the thermometer bulb in it.
The method of the temperature calibration of this instrument is two-point linear calibration. The calibration point may be set
freely, and by setting the second calibration point the same as the first calibration point, you can adjust the calibration point to one
temperature point. For two-point calibration, if you set the two points at 40°C and 100°C, then other temperature points will be
automatically adjusted per the linear relationship of the two calibration points.
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
Temp
Time
TEMP
TIME
TIME
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
ME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TIME
TEMP
TIME
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
Temp
Time
TEMP
TIME
TIME
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
ME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TIME
TEMP
TIME
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
Temp
Time
TEMP
TIME
TIME
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TEMP
TIME
TIME
TEMP
TIME
SPEED
TEMP
TIME
SPEED
TEMP
ME
SPEED
TEMP
TEMP
TIME
TIME
TEMP
TIME
TEMP
TIME
TEMP
Press both
Temp
and
Temp
at the same time,
and the display will show
the set value of the last
time (for example 20°C)
and the cursor of the first
calibration point (C_1).
Press the temperature
set up button (
Temp
or
Temp)
to set the first
calibration temperature
(such as 40°C).
Perform the same
operation again to set
the second calibration
temperature (such as
100°C).
NOTE:
When setting up the temperature points, it is recommended to set the low temperature point first and then the high
temperature point. When performing the following calibration, the temperature points should be set up in this order. In the case that
the temperature points are set up in reverse order (high then low), please reorder the temperature points to the recommended order
when calibrating.