2
Sensor connectors
46
= sensor 1, connection 1
47
= sensor 1, connection 2
48
= sensor 2, connection 1
49
= sensor 2, connection 2
50
= sensor 3, connection 1
51
= sensor 3, connection 2
The sensor connection is a polarity-free digital bus, which means
that it does not matter which sensor terminal the wires are
connected to.
3
Relay outputs
RELAY 1
19
= Relay common contact
20
= Contact that opens in an alarm situation
21
= Contact that closes in an alarm situation
RELAY 2
22
= Relay common contact
23
= Contact that opens in an alarm situation
24
= Contact that closes in an alarm situation
The maximum values presented in the technical specifications must
be taken into account.
4
Cable connector:
LCJ1-1 for a single sensor
LCJ1-1 for two sensors
LCJ1-3 for three sensors
5
Sensors
6
Extension cable, e.g. protected, twisted-pair 2 x 0.5 mm
2
, maximum resistance 68
Ohm.
Extra wires and shield must be cut and isolated carefully.
Installation and Operating Instructions | idOil-D30
17/51
DOC001602-EN-4
