18
The following status indicators are provided:
- Power supply off.
- Power supply on, parameters are OK.
- Flashing with alarm sound – Power supply failure.
WARNING!!!
Be careful while working with power. AMP power at the Analyzer input
can damage connected devices, unless they are designed for it. Power from the coaxial
cable can also damage the Analyzer.
4.4 Data manager
4.4.1 General information
Data manager provides automation of measurement and result recording procedures.
The Analyzer offers two tools: Channel plan manager and Data log manager. The memory
capacity allows you to save up to 16 channel plans (up to 112 channels per plan), and up
to 130 data log pages (with maximum number of channels). The DAT103 allows you to
view the saved data in stand-alone mode or by means of a computer.
4.4.2 Channel plan manager
The
icon in the data manager menu refers to this mode. The mode allows you to
perform all the operations with channel plans (viewing, editing, deleting, and creating
channel plans). The screen view is represented in the Figure 4.4.1.
On the screen you will see the following data:
1 – table header line
2 – channel plan selected for the measurement
3 – command line with commands activated by
F1
,
F2
and
F3
functional keys
4 – scroll bar
The first column contains a plan index number. The second column is a plan name of
up to 15 characters in length. This name is assigned by the user during creating and later
can be edited by DAT Tools PC software. If the channel plan is not available, it will be
indicated by
***********
message. If a channel plan has been selected in Setup (Section
4.5), its name will be highlighted in inverse color (position 2).
Using
,
arrows you can select a channel plan from 1 to 16 index number. The
selected channel plan will be framed.
The list of available commands:
a)
F1
key to view and edit the selected channel plan;
b)
F2
key to delete the selected channel plan;
c)
F3
key to create a new channel plan in automatic mode.
Figure 4.4.1
