background image

3

RECOMMENDATIONS

THIS  INSTRUCTION  MANUAL  IS  INTENDED  FOR  THE  FINAL  USER  OF A  LABEL 
AUTOMATIC SWING DOOR SYSTEM; IT IS UNDERSTOOD THAT INSTALLATION 
AND TESTING MUST HAVE BEEN CARRIED OUT BY SPECIALISED PERSONNEL.

GENERAL SAFETY WARNINGS

PROVISIONS

The automatism has been designed to be used exclusively with pedestrian automatic swing doors. 
The manufacturer accepts no responsibility for incorrect product usage, as well as for any 
damages arising from changes to the system made without his prior consent. 
When operating the system accident prevention regulations must be observed.

REMARKS

Always meet the usage and maintenance conditions provided for by LABEL. 
Maintenance  and  repair  operations  must  only  be  performed  by  qualified  and  properly 
trained personnel.

PROPER BEHAVIOUR

Only use the automatic door if it is in perfect technical conditions.
In case of failure or malfunction that might affect safety immediately contact the  service 
centre.
Inappropriate use of the system may cause serious injuries and damage.

BEFORE  COMMISSIONING THE AUTOMATIC DOOR PLEASE CAREFULLY
READ THIS MANUAL.

!

Содержание Neptis SMP

















Отзывы: