Chapter 7: Troubleshooting
Product Service 816-333-8811 or 1-800-522-7658
41
Heat Transfer Fluid Precautions
The fluid’s name and manufacturer are:
Name: Lexol 542
Manufacturer: Santa Barbara Chemical Co.
927 Indio Muerto
Santa Barbara, CA 93140
805-963-7793
The fluid used for heat transfer in this system is
combustible and hazardous. Leaks and spills should
be attended to immediately or serious injury could
occur.
Handling and Storage Precautions – Dirty Solvent:
Store in
accordance with all applicable regulations. Tighten caps and store in
a cool area.
Precautions if Material is Released or Spilled:
Spills should be
contained immediately. Spills may be soaked up with absorbent
materials, placed in closed containers, labeled, stored and disposed of
properly. Persons performing this work should wear adequate
personal protective equipment and clothing.
Disposal of Non-Recyclable Solvents:
Dispose of in accordance
with all federal, state, and local health and pollution regulations.
Follow same guidelines as when disposing kerosene.
Heat Transfer Fluid First Aid Procedures
Eye Contact:
Immediately flush eyes with fresh water for at least 15
minutes. If irritation persists, get medical attention.
Skin Contact:
Wash contaminated areas with soap and water.
Remove contaminated clothing and footwear. Wash clothing before
reuse. Discard footwear which cannot be decontaminated. Medical
attention may be required.
Inhalation:
Remove patient to fresh air. If breathing stops, give
artificial respiration. Get medical attention immediately, if required.
Ingestion:
Get medical attention immediately. Do not induce
vomiting.