LABBOX KJD20 Скачать руководство пользователя страница 3

 

3

 

I. Safety 

1. Overview 

 

This operating manual is prepared for the laboratory instrument operators. Please read this manual 
carefully  before  using  the  instrument  and  conduct  the  operation  according  to  the  manual.  Personnel 
who  are  not  familiar  with  the  instrument  operation  or  safety  information  shall  not  operate  the 
instrument.  
This  instrument  adopts  the  current  most  advanced  technology  for  design  and  manufacturing.  But  the 
improper use of this instrument will cause a potential safety hazard.  
The instrument manufacturer has made the assessment on the possible hazard:  
-Inexperienced personnel operating the instrument 
-Failure to operate the instrument according to the normal regulations 
-The operators of this instrument shall know all the below mentioned warnings. 

 
2. Safety  

Warning: This instrument is only used for laboratory. If the instrument is damaged due to the 

failure of conducting the operation according to the manual during the use, the manufacturer refuses to 
bear all consequences.  

Warning: If the failure of using the instrument properly or conducting the operation according 

to the operating manual causes any consequences, the company will not bear the safety problem of 
instrument use.  

Warning: The failure of operating the instrument as required by this manual will weaken the 

safety performance of the instrument.  

Warning: Please conduct the treatment of various solutions used in the test according to the laboratory 

safety regulations. Operators shall wear the rubber gloves, lab coats and goggles. 
 

Warning: Oral intake of boric acid will cause acute poisoning, which is mainly embodied in 

gastrointestinal  symptoms,  nausea,  emesis,  abdominal  pain,  diarrhea,  etc.,  and  then  dehydration, 
shock,  coma or acute renal failure, or high fever, liver and kidney  damage, convulsions and even 
cause  death  if  serious.  It  is  easily  absorbed  by  the  damaged  skin  and  causes  poisoning.  Chronic 
poisoning  long-term  absorption  of  small  amount  of  boric  acid  in  gastrointestinal  tract  or  skin  will 
lead to mild digestive tract symptoms, dermatitis, baldness and liver and kidney damage.  

Warning: Sodium hydroxide has causes irritation and shows high corrosivity. The powder or 

smog will irritate the eyes and respiratory tract and corrode nasal septum. Direct contact of skin or 
eyes  with  sodium  hydroxide  may  cause  burns,  and  accidental  take-in  can  cause  gastrointestinal 
burns, mucosal erosion, bleeding and shock.  

Warning:  Sulfuric  acid  (95-98  %)  has  intense  irritation  and  corrosive  effect  upon  the  skin, 

mucosa, and other organs. Vapor or mist may cause conjunctivitis, conjunctival edema, and corneal 
opacity,  and  consequently  blindness;  it  may  cause  respiratory  irritation,  and  may  cause  dyspnea 
and pulmonary edema in severe cases. High concentration may cause the laryngospasm or glottic 
edema,  and  finally  death  by  suffocation.  Oral  take-in  may  cause  digestive  tract  burns  and  thus 
elcosis. It may cause gastric perforation, peritonitis, renal damage, shock, etc. in severe cases.  

Warning:  The  temperature  of  the  digestive  tract will  reach  100 

  during  the  experiment. 

After completing the distillation, take the testing tube out with test tube holder for avoiding scald.  
 
 
 
 
 
 
 
 

Содержание KJD20






















Отзывы: