background image

1. General Information

1.1 Introduction

The "Multicom Repeater 900MHz" is designed by using the most advanced 
Self-Repeating communication technology. It serves user-friendly features 
and also extremely convenient to expand the communicating coverage 
of Multicom.
It gives expanding of communicating coverage around 2.1km~3.0km
typically by consist of 2 Repeaters with up to 8 users multiplex
communication excluding Reprater itself.
Furthermore, it is available to expand the talk range by cable connection
between Repeater.
In this case, the talk range is dependant on the cable length and maximum
available handsets are 16 units in full duplex excluding Repeater itself.
It is recommendable you read the user’s manual thoroughly to enjoy its
maximized performance and features this repeater has to offer.

1.2 Main Features

* Long distance communication coverage over 2.1km ~ 3.0km typically
* 39 different Group communicating selection per Repeater
* Audio output HI/Low selection
* Audio volume control with 9 steps
* Side tone On/Off selection
* Direct microphone sensitivity control with 5 steps
* Convenient USB power source for the purpose of its portable using by
   connection Mobile phone Power bank into it or DC 5.0V adapter via AC
   input

Содержание MR-900












Отзывы: