4
Dolby Lake Controller User Manual PLM Edition Addendum
impOrTaNT
This addendum document only applies to the Dolby
Lake Controller (DLC) PLM Edition software application
supplied with PLM Series Powered Loudspeaker
Management systems. It is intended to be read in
conjunction with the Dolby Lake Controller (DLC) User
Manual, which is also supplied with your unit.
The full DLC User Manual describes the standard
DLC as supplied with the stand-alone Dolby Lake
Processor (DLP). Note that the Dolby Lake processing
system integrated in the Lab.gruppen PLM Series
has slightly different functionality from the stand-
alone DLP. In addition, numerous features specific
to the PLM Series are accessible only by the
DLC PLM Edition software. It is therefore essential to
consult both documents as appropriate.
Note that the DLC PLM Edition software has all
necessary functionality to control standalone Dolby
Lake Processors (and Dolby Lake legacy processors)
as well as PLM Series units.
The DLC User Manual PLM Edition Addendum
provides most of the information needed to configure
and control the Dolby Lake Processing Modules in
the PLM Series units. Information on installing the
software and setting up a control network is also to
be found in the DLC User Manual.
The DLC PLM Edition Addendum (this document)
covers those areas of operation of the DLC PLM
Edition software concerned with PLM-specific features
(such as load verification and real-time performance
monitoring) not included in the standard DLC.
Wherever the DLC User Manual refers to
the “Dolby Lake Processor” or “DLP”, it can
be assumed that the information also applies
to “Lab.gruppen PLM Series” unless there
are specific references to a particular section of the
DLC User Manual in this document.
important
