102
PLM Series Operation Manual rev 1.1.3
13. Technical Specifications
13. Technical Specifications
Item no. TDS-PLM14000_V3
L A B . G R U P P E N A B
▸
S W E D E N
I N T E R N A T I O N A L C O N T A C T
▸
I N F O @ L A B G R U P P E N . C O M | U S & C A N A D A C O N T A C T
▸
I N F O @ T C G - A M E R I C A S . C O M
w w w . l a b g r u p p e n . c o m
General
Number of input channels
2
Number of output channels
2
Peak total output all channels driven
14000 W
Max. Peak output voltage per channel
193 V
Max. output current per channel
90 A peak
Max. Output Power
2 ohms
4 ohms
8 ohms
16 ohms
All channels driven
7000 W
4300 W
2300 W
1150 W
Channel A, while channel B is driven at -3dB
2)
7500 W
4400 W
2300 W
1150 W
All channels driven into optimal impedance interval
> 7000 W into 1.8 – 2.1 ohms
Audio Performance
THD + N 20 Hz - 20 kHz for 1 W
<0.05%
THD + N at 1 kHz and 1 dB below clipping
<0.04%
Dynamic range with digital inputs (for all supported sample rates)
>114 dB
Dynamic range with analog inputs
>112 dB
Frequency response (1 W into 8 ohms, 20 Hz - 20 kHz)
+ /-0.05 dB
Input Common Mode Rejection (CMR) 20 Hz to 1 khz
>78 dB
Internal sample rate
96 k
Internal data path
32 bit fl oating point
Product propagation delay, best case (96 kHz AES)
1.61 ms
Product propagation delay, analog input
1.68 ms
Sample Rate Converters
THD + Noise
0.00003 %, 20 Hz - 20 kHz, unweighted
Analog to Digital inputs
THD + Noise
0.00022 %, typical at 1 kHz unweighted at +26 dBu headroom setting
0.00033 %, typical at 20 Hz and 20 kHz unweighted at +26 dBu headroom setting
AES / EBU inputs
Supported resolutions
≤24 bit
Supported sample rates
44.1, 48, 88.2, 96, 176.4, 192 kHz
Dante Audio Network
Supports redundant paths
Yes
Flexible topology
Yes
Network latency
0.8, 1.3 and 4 ms
Device presets
Local memory locations for the settings of the product
100
Limiters
Adjustable Inter-Sample Voltage Peak Limiter (ISVPL)
17.8 - 193 V, step size 0.1 V
Current Peak Limiter < 300 ms
90 A peak
Current Average Limiter (CAL) > 300 ms
44 Arms
LimiterMax (rms and peak limiters)
– MaxRMS (rms voltage limiter)
Yes
– MaxPeak (peak voltage limiter)
Yes
Gain
Amplifi er gain
22 - 44 dB, step size 0.1 dB
Analog attenuator
-Inf to 0 dB, step size 0.25 dB
Back panel interface
AES / EBU / I/O (input + link)
2 x 3-pin XLR
Analog, 2-channel I/O (input + link)
4 x 3-pin XLR, electronically balanced
Output connectors
Neutrik Speakon (2 x NLT4) or 4 Binding Posts (pairs) (must be specifi ed upon order)
Auto 10/100, Auto Uplink
2 x RJ45 EtherCon Auto 10/100, Auto Uplink
Control and monitoring interface
Via Ethernet for Lake Controller software
Detachable mains cord
Neutrik PowerCon 32 A
Cooling
Two fans, front-to-rear airflow, temperature controlled speed
Front-panel user interface:
Display, daylight readable LCD
2.5 inch
Fault/Warning/Limit/Clip indicators
RGB LEDs
Mute and soft function buttons
8 provided
Standby Power button
On/Off
Mute Enable button
Enables muting of outputs and inputs via soft-button keypad
Meter button
Toggles through meter views
Menu button
Provides a menu driven interface for full function front panel control
Rotary Encoder
Yes
Exit button
Provides a “back” function
Power
Operating voltage, 230 V / 115 V nominal
1)
140-265 V / 70-135 V (45 - 66 Hz)
Soft start / Inrush Current Draw
Yes / max. 5 A
Mains Power Average Limiter (PAL)
Yes
Dimensions (W/H/D)
W: 483 mm (19”), H: 88 mm (2 U), Overall D: 470 mm (18.5”) deep including handles and rear support.
Weight
13.5 kg (30 lbs.)
Finish
Black painted steel chassis with black painted steel / aluminum front
Approvals
CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC
Note 1)
: Separate 230 V or 115 V versions available. Not selectable on the product.
Note 2)
: Assymetrically loading the output channels (as shown, for example): If one channel has reduced output power requirements, the voltage drop from the power supply will be reduced,
resulting in a higher voltage and power output for the other channel.
All specifications are subject to change without notice.
Intercooler, Class TD and Lake are national and/or international registered trademarks of Lab.gruppen AB. PLM, Powered Loudspeaker Management, R.SMPS, LoadLibrary, LoadSmart,
SpeakerSafe and ISVPL are trademarks of Lab.gruppen AB. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. Contour, Mesa Quad EQ, Mesa Parametric EQ, Raised
Cosine Equalization, LimiterMax and Iso-Float are trademarks of Dolby Laboratories. Audinate is a registered trademark of Audinate Pty Ltd. Dante and Zen are trademarks of Audinate Pty Ltd.All
other trademarks remain the property of their respective owners.
Copyright © 2009 Lab.gruppen AB.
All rights reserved.
PLM 14000
