LAB-BOX PROFESSIONAL LID, Руководство пользователя

Страница: 11 / 12

11
| Contents - COMPLIANCE |
EU Declaration of Conformity
Hereby, ars-imago international srl decla-
res that the Lab-Box Professional Lid is in
compliance with the essential requiremen-
ts of the Electromagnetic Compatibility Di-
rective (2014/30/EU), Low Voltage Directive
(2014/35/EU) and RoHs Directive (2011/65/
EU) and other relevant provisions, when
used for its intended purpose.
FCC Compliance Statement
This device complies with Part 15 of the
FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) this device may
not cause harmful interference, and (2) this
device must accept any interference recei-
ved, including interference that may cause
undesired operation.
Caution The user is cautioned that changes
or modifications not expressly approved by
the party responsible for compliance could
void the user’s authority to operate the
equipment. This equipment must not be
co-located or operated in conjunction with
any other antenna or transmitter.
Note This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to pro-
vide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interfe-
rence to radio communications. However,
there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equi-
pment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the re-
ceiver is connected.
• Consult the dealer or an experienced ra-
dio/TV technician for help. This equipment
complies with fcc radiation exposure limits
set forth for an uncontrolled environment.
End user must follow the specific operating in-
structions for satisfying rf exposure compliance.
The symbol means that
according to local laws
and regulations your pro-
duct should be disposed
of separately from hou-
sehold waste. When this
product reaches its end
of life, take it to a col-
lection point designated
by local authorities. Some collection points
accept products for free. The separate col-
lection and recycling of your product at the
time of disposal will help conserve natural
resources and ensure that it is recycled in
a manner that protects human health and
the environment.