Lab12 gordian - Multifunctional Power Distributor / Conditioner
Page
9
of
10
Connections
Main connections
Connect a high grade 20A power cable to the IEC input and to your wall socket. Make sure that your
wall socket provides a good ground before connecting the power cable. You can supply 230 to 240
Volt AC/ 50Hz
(115 to 120 AC Volts / 60Hz). Check the polarity immediately after the first time of
usage and correct the wall plug if needed.
Gordian is tuned and calibrated using the
Lab12 Knack mk2 Power Cable
. We strongly suggest using
this cable.
Connect devices
You can connect any kind of audio-video devices on the total six power outlets on the back panel
of gordian to exploit the conditioned power. Use low filtered outputs
(B)
to connect high current
devices (power amplifiers, plasma tv etc.) and high filtered outlets
(A)
for low consumption devices
(preamplifiers, cd players, DACs etc.). Live (phase) connection is always in the right pin of each
outlet. Never exceed the maximum limits of current for low and high filtered outlets
(low filtered
outlets max 15A, high filtered outlets max 4A)
.
For the safety of your equipment
!
Make sure that all your equipment is turned off before any connection.
! Never exceed the maximum limits of current for low and high filtered outlets (low
filtered outlets max 15A, high filtered outlets max 4A).
