Lab12 gordian - Multifunctional Power Distributor / Conditioner
Page
6
of
10
6
Voltage FFT
Frequency analysis of your line’s
voltage. Inspect here the frequency
content of your AC voltage signal
(frequency range 50Hz-7kHz).
Push the rotary knob to inspect the frequency
content of your voltage signal. You can see the
gain of each frequency band by rotating the
knob.
Push again to go back to the main menu
navigation.
7
Current FFT
Frequency analysis of your system’s
current. Inspect here the frequency
content of your AC current signal
(frequency range 50Hz-7kHz).
Push the rotary knob to inspect the current
content of your current signal. You can see the
gain of each frequency band by rotating the
knob.
Push again to go back to the main menu
navigation.
8
Power factor
correction
configuration
Configures
the
power
factor
correction that your filter performs.
Push the rotary knob to select among the
available power factor configurations. See
paragraph
'Power
factor
correction
configuration'
below for more detailed
information.
Push the button again to lock your selection.
9
EMI filter
effectiveness
configuration
Configures
the
EMI
filter
effectiveness.
Push the rotary knob to select among the
available effectiveness levels. Read paragraph
'Emi filter configuration'
below for more
detailed information.
Push the button again to lock your selection.
10
EMI filter
topology
configuration
Configures the EMI filter topology.
Push the rotary knob to select among the
available filter topologies. Read paragraph
'
EMI filter configuration'
below for more
detailed information.
Push the button again to lock your selection.
11
Standby current
setup
Configures the standby current of
your system.
Press and hold the rotary knob to update the
standby current of your system. See paragraph
'Operation modes'
below for more detailed
information.
