LAARS’ ProtoNode Startup Guide
Page 23 of 43
•
From the FST Web GUI’s landing page, click on “Setup” to expand the navigation tree and then
select “Network Settings” to access the IP Settings menu. (
Figure 18
)
•
Enter the new IP address for the ProtoNode’s Ethernet port in the “N1 IP address” field.
•
If necessary, change the Subnet Mask setting in the “N1 Netmask” field.
•
If necessary, change the IP Gateway setting in the “Default Gateway” field.
•
Note: If the ProtoNode is connected to a router, the IP Gateway of the ProtoNode should be
set to the IP address of the router that it is connected to.
•
Click the “System Restart” button at the bottom of the page to apply changes and restart the
ProtoNode.
•
Unplug Ethernet cable from PC and connect the ProtoNode to the network hub or router.
•
Record the IP address assigned to the ProtoNode for future reference.
Figure 18: Changing IP Address via FST Web GUI
The LAARS Gateway LER and RER Startup Guide
Page 23 of 43
20
Industrial Way, Rochester, NH, USA 03867
•
(800) 900-9276
•
www.Laars.com
1604 Document 4236E
