La Spaziale S1 Rossini, Руководство по эксплуатации и техническому обслуживанию

Страница: 10 / 20

MANUAL FOR USE AND MAINTENANCE
10
LSC 006 REV. 01
3.2 HOT WATER DELIVERY FOR INFUSIONS
1. Place the pitcher below the hot water output (28).
2. Press the hot water delivery push-button (23).
3. The hot water delivery starts (at this stage the pump is working).
4. Once the desired quantity is reached, stop the delivery by pressing the same button (23).
After taking hot water, the pump remains on for another 15 seconds (water refill cycle inside the boiler).
3.3 STEAM DELIVERY
1. Press the steam button (26) and keep it pressed until the control lights 14-15-16-17-18-19-20-21 start
flashing, to indicate that the cycle for the steam delivery has started. As soon as the temperature of 130
°
C
is reached, the control lights become fixed to indicate that the phase for steam production is over.
2. Insert the steam wand (2) into the pitcher containing some water.
3. Turn the steam knob (6) anticlockwise, in order to let out the condensation for about 5 seconds
4. Turn the steam knob (6) clockwise, in order to stop the delivery
5. Throw away the water inside the pitcher and pour in the drink to be heated up
6. Insert the steam wand (2) into the pitcher
7. Turn the steam knob (6) anticlockwise, regulating the steam flow according to need
8. At the end of the heating phase of the drink, stop the steam delivery by turning the steam knob (6)
clockwise.
9. Remove the steam wand (2) from the pitcher and clean it immediately with a humid sponge to remove
all possible residues of the heated drink.
10. In order to go back to the standard operating phase press the steam button (26), the temperature
automatically goes back to the set and for 35 seconds the pump keeps working (water refill cycle inside
the boiler), during this phase it is impossible to make deliveries.
WARNING!!
During the steam delivery cycle all coffee brewing and hot water delivery functions are deactivated.
Do not turn the steam knob (6) before placing the steam wand (2) inside the pitcher, in order to avoid possible
burns.
The cycle to produce steam is interrupted either with the steam button pressure (26) or automatically after
10 minutes from the beginning of the cycle itself.