espresso coffee machines
23
8
9
-
LSI 089 - Rev. 00 - Ed. 04/2015
5. SWITCHING ON THE MACHINE
5.1 FILLING THE BOILER
A. Open the water supply tap as arranged during the preparatory stages (see Fig. 12 on page 20 - Ref. 1).
B. Verify that the water mains pressure (approx. 4 bar) is visualized on the water mains pressure gauge (14).
C. Push the manual filling valve on the appliance (19) until the boiler level indicator is halfway (16).
5.2 SWITCHING ON THE APPLIANCE
A. Turn on the power supply switch that was prearranged during the system preparation (see Fig. 11 page 18 – Ref. 1), and then turn
on the machine’s main switch (
12).
Once the machine is switched on, an electronic components check is carried through on 2-3-4 groups machines; all the symbols on
the control panel, from left to right, are progressively turned on. At the end of this process, the symbol for the temperature setting
will start to blink to indicate that the appliance is heating up.
Take note!
According to the amount of water filled manually, it is possible to activate the automatic refill system when the switch (
12) is
turned on, until the boiler water level indicated by the manufacturer is reached.
Содержание Compact S8
