Page 8 of 36
Press the key N°11( ON/OFF ), the display shows:
Filling - up steam boiler
During this stage the steam boiler is being filled up
WARNING
:
In according to the machine configuration in this stage will be release the air inside the boiler by opening a steam nozzle,
milker or hot water solenoid valve.
When the steam boiler has been filled up, the display shows:
Filling - up coffee boiler
Press T 1
When water exits
During this stage the coffee boiler is being filled up
WARNING
:
The upper piston of the coffee group positions itself inside the brewing chamber, and the coffee boiler starts filling up. When
the coffee spout starts dispensing water, press the key dose N° 1 to confirm that the filling up procedure has been carried
out. When the coffee boiler has been filled up, the display shows:
Coffee
Steam
XXX C°
YYY C°
Where:
- XXX °C indicates the temperature of the coffee boiler
- YYY ° C indicates the temperature of the steam boiler
WARNING
:
A) DURING THIS STAGE REMOVE ANY PITCHER WITH MILK OR ANY OTHER KIND OF LIQUID BY THE STEAM WAND.
B) DURING THIS STAGE THE STEAM NOZZLE SOLENOID VALVE FOR PLUS 10 COF VERSION AND THE MILK FROTHER
SOLENOID VALVE FOR PLUS 10 LM WILL STAY OPEN UNTIL 95°C. THIS WILL RELEASE THE AIR FROM THE BOILER AND
GENERATE STEAM.
c)
WHEN THE BOILER TEMPERATURE OF 50°C ITS REACHED THE MACHINE CARRY-OUT A RINSING GROUP .THIS IS USEFULL
TO RELEASE AIR FROM THE WATER COFFEE CIRCUIT, THE DISPLAY WILL SHOW:
Then the display shows:
G. auto cleaning
When the set-up temperature has been reached, for machine configurations Standard
The display shows:
Select drink
For machine configurations: Self.
The display shows:
Select drink
Alternated with the message:
Position the cap
