LA NORDICA ELLIPSE, Использование и обслуживание, Страница: 17 / 60

ELLIPSE
7196901 Rev.09 – EN
17
1. TECHNICAL DATA
Definition:
chimney stove according to
EN 13240
ELLIPSE
Constructive system
1
Rating power
in kW
8
Efficiency
in % 78.1
Pipe diameter
in mm
160
Hourly wood consumption
in kg / h (wood with 20% humidity)
2.4
Depression by rating calorific value
in mm H
2
O
wood
1.2
Mean content of CO to 13% O
2
in %
0.09
Emission of exhaust gases
in g/s-
wood
7.3
Temperature of exhaust gases
in °C -
wood
312
Size of hearth opening
mm (W x H)
540x245
Hearth body size /Hearth head
in mm (W x H x D)
500x320x360
Grate type
Flat grate
Stove width
in mm
1240
Stove height
in mm
1135
Stove depth
(without handles) in mm
680
Weight
in kg
251
Safety measures
Chapter 4
The heating volume of the stoves for those buildings in which the thermal insulation does not correspond to
the instructions on heat protection is:
(30 Kcal/h x m
3
) - type of favourable construction 230 m³
(40 Kcal/h x m
3
) - type of less favorable construction 170 m³
(50 Kcal/h x m
3
) - type of unfavorable construction 138 m³
With a suitable thermal insulation, complying with the instructions on heat protection, the heating volume is
greater. In case of temporary heating, with interruptions of more than 8 hours, the heating volume is
reduced by about 25%.
2. TECHNICAL DESCRIPTION
The chimney stoves of La Nordica are suitable to heat living spaces for some periods. As fuel, wood logs
are used. The stove is made of sheets in galvanized and painted steel, of cast iron (grate and grate holder
of the hearth, exhaust pipe) of majolica tiles and of glass panels. The hearth is totally sheathed with cast-
iron single sheets and refractory material (IRONKER). Inside there are a easy extractable thick flat grate
and its holder. The combustion chamber is hermetic welded and is sheathed with a painted steel carter.
The inside smoke plate made of vermiculite, reflects the fire radiation and increases the internal
temperature of the combustion chamber. This process together with the exhaust gases flows, makes
optimal the combustion and improves the efficiency.