La Marzocco SWIFT EPSB, Руководство по устранению неисправностей, Страница: 7 / 32

7
6. Equipment Operating Instructions
Engaging the portafilter
The portafilter engages directly to the Swift EPS
B
. Since the Swift EPS
B
has no watertight seal, it is
not necessary to force the portafilter into place. Engage the portafilter with only a light amount of
force. If the grinder shifts on the counter top, you are using too much force.
Engage portafilter gently There is no need to force it into position
Operating the SWIFT
Once the portafilter is engaged, press one of the start buttons located at the front of the Swift
EPS
B
. The right and left buttons correspond to the right and left bean hoppers. Coffee will be
ground, dosed, and tamped from one of these hoppers, depending on which button you press.
The red indicator lights located above the start buttons are illuminated when the Swift EPS
B
is
grinding and tamping. Wait for the light to turn off before removing the portafilter. Once the red
light corresponding to the button selected is no longer illuminated, you may remove the portafilter
from the Swift and engage it into the espresso machine.
The Swift EPS
B
tamps the coffee as it is ground. When the volume of ground coffee in the
portafilter reaches the set level, the grinding motor turns off. The tamping motor continues to run
for 1-3 seconds, "polishing" the tamped coffee.
1 2