La Marzocco SWIFT EPSB, Руководство по устранению неисправностей

Страница: 24 / 32

24
WARNING Technician Tasks only to be completed by qualified and skilled service personnel.
17 18 19
17.
Rotate the carrier clockwise until you see the lower mill move
18. Once you locate the point in which the two grinding burrs come into contact with one another,
turn the upper carrier counter clockwise 1/4 turn
19. Reinstall the worm gear and line up the knob pin parallel with the side of the grinder
20. Reinstall the clamp ring and tighten. Ensure the screw can be accessed with the grinder cover
installed
.
.
21 22 23
21
. Ensure the knob pin is centered in cover hole. If not, loosen clamp ring screw and adjust
22 . Reinstall the knobs and check for freedom of motion. If the knobs are hard to turn, loosen the
clamp ring screw and adjust the gear assembly
23 . Reassemble the grinder and test for proper operation