EN
84
Display
Operating Procedure
Description
“Technical” Programming
(only on ABR espresso machine models)
• This parameter enables the technician
to set some scale parameters like:
-
Enabling/disabling
the
offset
parameter;
- Setting the weight reading time;
- Calibrating the scales;
- Updating the scale software.
Scales
Configuration
Program Scales
Press the T3 button
to start the calibration procedure.
Remove any object from the scale, then press the T3 button
to confirm.
Place the reference weights onto the scale, then press the T3 button
to confirm. At the end of the process,
the self-calibration values or a confirmation message are displayed.
Repeat this operation for each group.
Press
T2
to proceed with setting and press the T3 button
to update the scale firmware if necessary.
Press T3 button
to start the test procedure.
Now you can put any weight on the scale to verify its operation.
Press the button T3 button
to enter the menu.
Calibrate
Scales
Empty G1 Scale
And Press Enter
Place 100g on G1
And Press Enter
6
7
G1 Scale: v2.5.2
Upgrade to 2.5.2
Start Scale
Testing
8
9
View Scale
Versions
█ █ █ █ █ █ █ █ █ █ █
Enter to Exit
0.0 0.0 0.0
Enter to Exit
Содержание Strada AV
Страница 115: ...EN 115...
Страница 116: ......
