La Marzocco LEVA X, Руководство пользователя

Страница: 29 / 98

EN
29
1) Cleaning of groups and diffuser screens
- Remove the diffuser screen and wash it
separately as described further below.
- Using a wet soft cloth, clean the surface
of the piston laying under the removed
diffuser screen.
- Unscrew the siphon screw.
- Add a spoonful of espresso-specific
powder detergent to the blind filter in
the portafilter (following the instructions
provided by the product manufacturer), then
insert the portafilter into the group you wish
6. Maintenance and Periodic Cleaning Operations
WARNING
Jets of water should not be used
to clean the machine, nor should
it be placed where water jets
are used.
WARNING
This machine is for professional
use only and should be installed
in locations where its use and
maintenance is restriced to
trained personnel.
WARNING
The machine is intended to be
permanently connected to fixed
wiring, and it is advisable that
a residual current device (RCD)
with a rated residual operating
current not exceeding 30mA is
installed.
WARNING
The machine must be installed
so that qualified technical
presonnel can easily access it
for eventual maintenance.
WARNING
The machine must not be dipped
in, nor splashed with, water in
order to clean it. For cleaning
operations, please follow the
instructions listed below very
carefully.
WARNING
Do not remove the filter holder
while relative group is brewing
hot liquids.
The Coffee Boiler contains water
at elevated temperature. Water
temperature over 125°F / 52°C
can cause severe burns instantly
or death from scalding.
WARNING
In order to prevent cracks or
leakage: do not store or install
the coffee machine in places
where temperature may cause
water in boiler or hydraulic
system to freeze.
WARNING
If the above-mentioned
instructions are not adhered
to the manufacturer cannot be
held responsible for damage to
persons or things.