La Marzocco GS/3, Руководство по программированию

Страница: 6 / 30

EN
30
Display Operating Procedure
Description
The following is the procedure for turning
on the power to the espresso machine.
• Please follow the procedures carefully
to avoid any damage to the espresso
machine.
NOTE: If the message “First Installat.
Enter to confirm” appears in the display,
please see the preceding page entitled
“Initial installation”.
Start Up Procedures
1
3
1
2
Turning the Espresso
Machine On
HAZARDOUS VOLTAGE DISCONNECT FROM POWER SUPPLY BEFORE SERVICING
3D5 DE LUXE MAR
OFF 09:30
170.5
o
F 06:30
La Marzocco T:00
Turn the Main Switch to the On position.
The message at left will be displayed briefly. This message indicates the revision level of the software installed in this
espresso machine. Then the following message is displayed.
To complete the turn on process, press the button and the display at left is shown. The machine begins to
automatically fill the steam boiler until full. When the espresso machine reaches operating temperature, all keypad
lights will light indicating that the espresso machine is ready to use.
NOTE: Ensure all air is removed from the group prior to staring the espresso
machine. This only needs to be completed once during the initial setup or when
water is drained from the coffee boiler