MOTOR PUMP
WATER PURIFIER
English
14
Start by setting the main switch (part 1) to the “0” posi-
tion.
Disconnecting from the power outlet
In case the machine is connected through the plug (part
24), make sure that the switch (part 23) is also in the Off
position before disconnecting. Disconnect the motor
pump (part 15) by pulling out its special plug (part 25).
Disconnecting from the water system
Shut off the water supply by closing the specific tap
located upstream of the purifier inlet. Disconnect the
water pipe at the purifier (part 17) inlet, which is locat-
ed just downstream of the special tap (part 18), which
has been closed in advance.
Proceed to remove the drain well piping (part 19, Fig.
1).
At this point, the machine may be removed from the
bar, being very careful not to drop it or squash your fin-
gers.
The machine is made out of various materials and there-
fore, if you do not intend to put it back in service, it must
be taken to a special disposal company which will select
the materials which can be recycled and discard the oth-
ers.
Current regulations make it illegal to discard such
machine by leaving it on public grounds or on any pri-
vate property.
7. De-commissioning and demolition
fig. 3 (see also pag. 7)
