background image

39 

 

Appendix D: Manufacturer’s Warranty 

All La Marche Manufacturing Co. equipment has been thoroughly tested and found to be in proper operating 
condition upon shipment from the factory and is warranted to be free from any defect in workmanship and 

material that may develop within five (5) years from date of purchase. 

Any part or parts of the equipment (except fuses, d.c. connectors and other wear-related items) that prove 

defective within a five (5) year period shall be replaced without charge providing such defect, in our opinion, is 

due to faulty material or workmanship and not caused by tampering, abuse, misapplication or improper 

installation. 

Should a piece of equipment require repair during the warranty period, the equipment can be returned to the La 

Marche factory to have the inspection, parts replacements and testing performed by factory personnel.  Should 

it be necessary to return a piece of equipment or parts to the factory, the customer or sales representative must 

obtain authorization from the factory.  If upon inspection at the factory, the defect was due to faulty material or 
workmanship, all repairs will be made at no cost to the customer during the first three years.  Transportation 

charges or duties shall be borne by purchaser. 

In accepting delivery of the equipment, the purchaser assumes full responsibility for proper installation, 

installation adjustments and service arrangements.  Should minor adjustments be required, the local La Marche 

sales representative should be contacted to provide this service only. 

All sales are final.  Only standard La Marche units will be considered for return.  A 25% restocking fee is 

charged when return is factory authorized.  Special units are not returnable. 

In no event shall La Marche Manufacturing Co. have any liability for consequential damages, or loss, damage or 

expense directly or indirectly arising from the use of the products, or any inability to use them either separately 

or in combination with other equipment or materials, or from any other cause.  In addition, any alterations of 

equipment made by anyone other than La Marche Manufacturing Co. renders this warranty null and void. 

La Marche Manufacturing Co. reserves the right to make revisions in current production of equipment, and 

assumes no obligation to incorporate these revisions in earlier models. 

The failure of La Marche Manufacturing Co. to object to provisions contained in customers' purchase orders or 

other communications shall not be deemed a waiver of the terms or conditions hereof, nor acceptance of such 

provisions.  

The above warranty is exclusive, supersedes and is in lieu of all other warranties, expressed or implied, 
including any implied warranty of merchantability or fitness.  No person, agent or dealer is authorized to give 

any warranties on behalf of the Manufacturer, nor to assume for the Manufacturer any other liability in 

connection with any of its products unless made in writing and signed by an official of the manufacturer. 

 

Содержание A77
















































Отзывы: