2
La Marche A39DS Battery Charger: Getting Started
WARNING:
Please read the Important Safety Instructions before proceeding. Make sure to check
for any shipping damages before getting started.
1 – Connect Proper AC Voltage
Confirm & connect proper AC voltage against charger nameplate. If charger is multi-tap, refer to AC Input
Voltage Tap Configuration table inside the charger or on charger schematic. Close AC breaker.
2 – Adjust Charger DC Output & Alarms
To access the Settings Menu, press the MENU button, select “Settings Menu”, and press the ENTER button.
Once in the Settings Menu, the user can navigate the submenus with the up and down arrows. To enter a
submenu, use the ENTER button. The BACK button returns to the previous menu. When making a selection, the
ENTER button will store the value and step back. The BACK button will not save the change and will go a step
back. At any point, the settings menu can be exited, with or without saving the settings.
Output Settings
•
DC Voltage
•
DC Current Limit
•
Elapsed Time
Alarm Settings
•
Low DC Current
Advanced Settings
•
Shutoff Enable
o
Low Current Turn Off
•
AC Volts Scale
•
Security
o
Password Enable
•
Firmware Menu
o
Firmware Version
o
Bootloader Version
o
Update Firmware
•
LCD Settings
o
LCD Backlight
•
Serial Number
•
Set Clock
o
Set Date and Time
•
Set to Default
Basic Defaults
•
Reset to default Settings
3 – Connect Batteries
Observe proper polarity when making battery connections. Close the DC breaker, if applicable.
A39DS
Quick Start Guide
