22
EN
TELESCOPIC RAILS
The telescopic rails can be installed on any level
of the oven guides
• Locate the two spring clips (front and rear) on
the telescopic rail.
• Locate the pin indicating the rear part of the
rail.
• Position the telescopic rail fl ush with the upper
edge of the selected level.
• Insert the front clip, pushing it towards the side
guide.
• Insert the rear clip, pushing it towards the side
guide.
• Repeat the insertion operation for the other
side.
• Pull both rails out and position the oven rack
or tray between the rear pin and the front stop.
Removing the Telescopic Rails
• Locate the two spring clips (front and rear) on
the telescopic rail.
• Keeping the front clip pushed down, pull the
rail towards the interior of the oven.
• Repeat for the rear clip.
ROTISSERIE FUNCTION
Used to cook joints of meat, chickens and fi sh
evenly on all sides using the grill element.
• Position the skewer support in level 3 of the
side guides.
• Place a tray on one of the lower levels of the
side guides to collect cooking grease.
• Insert the meat or fi sh on the rotisserie skewer
using the fork.
• Insert the skewer in the rotisserie motor
housing, located in the rear of the oven, and
rest it on the skewer support.
• Remove the plastic handle from the skewer.
• Select the grill function at maximum
temperature.
• When cooking is complete, refi t the plastic
handle and remove the food from the oven.
Important: rotisserie cooking must always be
performed with the oven door closed.
/ Use
ACCESSORIES / OPTIONAL EXTRAS
ACCESSORIES / OPTIONAL EXTRAS
Содержание Futura Series
Страница 1: ...1 EN INSTALLATION AND USER MANUAL BUILT IN GAS OVENS 3100456...
Страница 3: ...3 EN...