La Germania Futura Series, Инструкция по установке и эксплуатации

Страница: 14 / 26

14
EN
Step 2: Burner minimum adjustment
The oven thermostat has a screw for adjustment
of the minimum burn position. When the gas
supply type is changed, regulation of the
minimum position is required
as follows:
1. Pull the oven out from its niche by at least 5 cm
(only ovens with metal control panel).
2. Slacken off the screws holding the control panel
and remove it (only ovens with metal control
panel).
3. Light the oven burner and run at maximum
temperature for 10-15 minutes with the door
closed.
4. Turn the knob to the minimum temperature
position.
5. Remove the knob, introduce a fl at-head
screwdriver and turn the screw to adjust the
minimum position.
6. When using liquefi ed gas, the screw will need to
be turned all the way to the right.
GAS CONVERSION TABLE
/ Installation
GAS CONVERSION
Burner Gas type Pressure N o z z l e
diameter Nominal fl ow rate Flow rate
Reduced B y p a s s
diameter
mbar 1/100 mm g/h l/h kW kcal/h kW kcal/h 1/100 mm
Oven
Town gas G110 8 220 - 567 2.5 2150 0.8 688 41 reg
Natural gas G20 20 113 - 238 2.5 2150 0.8 688 41 reg
Butane G30 30 75 181 - 2.5 2150 0.8 688 41
Propane G31 37 75 178 - 2.5 2150 0.8 688 41
Grill
Town gas G110 8 1 8 5 - 408 1.8 1548 - - -
Natural gas G20 20 9 8 - 171 1.8 1548 - - -
Butane G30 30 64 130 - 1.8 1548 - - -
Propane G31 37 64 128 - 1.8 1548 - - -
GAS CONVERSION