8
RESETTING THE PROJECTION CLOCK
To reset the Projection clock to the factory default setting or in case of a malfunction or changing batteries
to transmitter, please remove all batteries from the unit and unplug the AC/DC adaptor from any power
source. Wait at least for 3 minutes before powering up the Projection clock again.
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of
these units.
Please participate in the preservation of the environment. Return used batteries to an
authorized depot.
PROJECTION OF TIME
Note:
The projection is a red light, not harmful under normal usage, yet care should be taken to
avoid looking
directly into the light.
1.
When plugged into an AC outlet, the projection alarm clock can continuously project the time and
the outdoor temperature
