26
There is also double sided tape included with the wall holder. On smooth surfaces this can be used
instead of drilling holes. The mounting surface can, however, affect the transmission range. If for example
the unit is attached to a piece of metal, it may then either reduce or increase the transmitting range. For
this reason, we recommend not placing the unit on any metal surfaces or in any position where a large
metal or highly polished surface is in the immediate proximity (garage doors, double-glazing, etc.). Before
securing in place, please ensure that the Projection Clock can receive the 433 MHz signal from the
Outdoor Transmitter at the positions that you wish to situate them.
CARE AND MAINTENANCE:
Extreme temperatures, vibration and shock should be avoided as these may cause damage to the
units and give inaccurate forecasts and readings.
When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring
agents as they may mark the LCD and casings.
Do not submerge the units in water.
Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new
batteries of the recommended type.
Do not make any repair attempts to the units. Return it to their original point of purchase for repair by
a qualified engineer. Opening and tampering with the units may invalidate their guarantee.
Do not expose the units to extreme and sudden temperature changes, this may lead to rapid
changes in forecasts and readings and thereby reduce their accuracy.
